烽火HG680-J刷磚了。怎么救啊

tutuletsgo · 發表于 2017-11-5 15:39

電信版HG680-J。刷了論壇卡刷固件變成聯通了。就又卡刷了個圣誕還是國慶版，結果現在就只能卡在開機聯通界面，。。。主板還沒有復位按鈕～～！怎么能救回來啊～～！大神快來

烽火HG680-J刷磚了。怎么救啊

tutuletsgo · 發表于 2017-11-5 15:48

Bootrom start
Boot from eMMC
Starting fastboot ...

System startup
DDRS
Reg Version:  v1.1.0
Reg Time:    2016/3/3 16:09:13
Reg Name:    hi3798mdmo1f_hi3798mv100_ddr3_1gbyte_16bitx2_2layers_emmc.reg

Jump to DDR

Fastboot 3.3.0 (xtao@ubuntu) (May 05 2017 - 11:31:39)

Fastboot:    Version 3.3.0
Build Date: May  5 2017, 11:34:15
CPU:          Hi3798Mv100
Boot Media: eMMC
DDR Size:    1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!

MMC/SD controller initialization.
MMC/SD Card:
MID:       0x70
Read Block:  512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name:       "M3250"
Chip Type: MMC
Version:    4.0
Speed:    52000000Hz
Bus Width: 8bit
Boot Addr: 0 Bytes

Boot Env on eMMC
Env Offset:       0x00100000
Env Size:          0x00010000
Env Range:          0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked

SDK Version: HiSTBAndroidV600R001C00SPC064_v2016093015

get chipid =137980100
get chipType (HI3798MV100)
count=2
press the key!!
get key 0 2
mac:F0:40:7B:91:B9:DC

Reserve Memory
Start Addr:       0x3FFFE000
Bound Addr:       0x8D32000
Free  Addr:       0x3EBA0000
Alloc Block:  Addr       Size
               0x3FBFD000    4194304
               0x3F8FC000    3145728
               0x3F87B000    524288
               0x3F878000    8192
               0x3F843000    212992
               0x3F742000    1048576
               0x3F73E000    12288
               0x3F3B9000    3686400
               0x3F223000    1658880
               0x3EE9E000    3686400
               0x3EBA0000    3133440

Press Ctrl+C to stop autoboot

MMC read: dev # 0, block # 307200, count 20480 ... 20480 blocks read: OK

86940833 Bytes/s

Found Initrd at 0x04000000 (Size 327218 Bytes), align at 16384 Bytes

## Booting kernel from Legacy Image at 01ffffc0 ...
Image Name: Linux-3.10.0_s40
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 7845504 Bytes = 7.5 MiB
Load Address: 02000000
Entry Point:  02000000
XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
libphy: PHY himii:1f not found
mmc0: unrecognised EXT_CSD revision 8
mmc0: error -22 whilst initialising MMC card
mmc0: unrecognised EXT_CSD revision 8
mmc0: error -22 whilst initialising MMC card
mmc0: unrecognised EXT_CSD revision 8
mmc0: error -22 whilst initialising MMC card
mmc0: unrecognised EXT_CSD revision 8
mmc0: error -22 whilst initialising MMC card
init: /init.bigfish.rc: 78: invalid option 'sdcard_r'
init:  not 512M version
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: /dev/hw_random not found
init: Unable to open persistent property directory /data/property errno: 2
init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
healthd: No charger supplies found
init: cannot find '/system/bin/vold', disabling 'vold'
init: cannot find '/system/bin/netd', disabling 'netd'
init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
init: cannot find '/system/bin/app_process', disabling 'zygote'
init: cannot find '/system/bin/drmserver', disabling 'drm'
init: cannot find '/system/bin/mediaserver', disabling 'media'
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/bin/installd', disabling 'installd'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/keystore', disabling 'keystore'
init: cannot find '/system/bin/umcpe', disabling 'umcped'
init: cannot find '/system/bin/frontPanel', disabling 'frontPanel'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/hiaoservice', disabling 'hiaoservice'
init: cannot find '/system/bin/netshared', disabling 'netshared'
init: cannot find '/system/bin/hisysmanager', disabling 'hisysmanager'
init: cannot find '/system/bin/hikaraokeservice', disabling 'hikaraokeservice'
init: cannot find '/system/bin/displaysetting', disabling 'display'
init: cannot find '/system/bin/pqsetting', disabling 'hipq'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/gpio-led', disabling 'gpio-led'
init: cannot find '/system/bin/hidns-sd', disabling 'hidns-sd'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: cannot find '/system/etc/init.bigfish.sh', disabling 'bigfish-setup'
init: cannot find '/system/bin/android_ir_user', disabling 'ir_user'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'

跑碼跑出的是這個

蝦餃 · 發表于 2017-11-5 15:51

變磚就很難了，不然你寄過來看看http://81jnr2m.cn/tv-600631-1-1.html

dyweiyun1 · 發表于 2019-10-5 15:10

111111

JUNRONG1314 · 發表于 2019-10-16 00:41

試一下

JUNRONG1314 · 發表于 2019-10-17 00:10

對對的

erjigit · 發表于 2021-1-27 22:52

學習學習

erjigit · 發表于 2021-1-30 00:05

學習學習

yjh7149 · 發表于 2024-3-13 08:55

試試換個電腦跑碼試試，最好操作系統低一點，win7, 我的就是這樣，win10 ,11怎么弄顯示這樣，換了一個電腦，換了個海兔版本，居然能正常跑碼了，正常刷機了

› 你問我答 / 玩機教程 / 固件 › ZNDS刷機/救磚