移動送的盒子能刷什么系統，附TTL信息，運生WS-D1F8-B02-S

baibye · 發表于 2017-12-24 16:55

本帖最后由 baibye 于 2017-12-24 19:17 編輯

主控芯片上有熱散芯片，
移動送的盒子能刷什么系統，附TTL信息，運生WS-D1F8-B02-S

TTL信息如下：HELLO! BOOT0 is starting!
boot0 version :
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.51
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
NOT GATE MODE
READ DQS LCDL = 00222122
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 576 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f40400
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =1024 M
odt delay
dram size =1024
NAND_PIORequest, nand_index: 0x00001000
Reg 0x01c20848: 0x0004adeb
Reg 0x01c2084c: 0x0004adde
Reg 0x01c20850: 0x0004adde
NAND_ClkRequest, nand_index: 0x0004adf6
Reg 0x01c20080: 0x0004adf3
Reg 0x01c20060: 0x0004ade6
Reg 0x01c202c0: 0x0004ade6
NAND_SeTCLk, nand_index: 0x0000000a
Reg 0x01c20080: 0x0004adf7
NB0 : nand phy init ok
sum=5e706800
src_sum=5e706800
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[    0.416]e mode

U-Boot 2011.09-rc1-00022-g50f77ef-dirty (Aug 06 2016 - 21:01:38) Allwinner Technology

[    0.425]version: 1.1.0
normal mode
[    0.432]pmbus: ready
not set main pmu id
axp_probe error
[    0.469]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[    0.500]DRAM:  1 GiB
relocation Offset is: 35af2000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
[    0.578]NAND: NAND_UbootInit
NAND_UbootInit start
NB1 : enter NAND_LogicInit
uboot:nand version: 2 2b 20160708 1122
nand : get id_number_ctl fail, 7fb98651
uboot:nand info: 9394de45 ffff5076 30188 321f09 4
nand : get CapacityLevel fail, 7fb9773b
not burn nand partition table!
boot_mode 1: nftl num: 3
init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[    1.625]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
read byte = 10
read byte = 10
[get_display_resolution] = 404
read byte = 10
[get_display_resolution] = 20b
boot_disp.auto_hpd=1
auto hpd check has 100 times!
auto check no any connected, the output_type is 4
[    2.999]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x0
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:14-
-name-       -start-    -size-
bootloader  : 1000000    1000000
env       : 2000000    1000000
boot       : 3000000    1000000
system    : 4000000    30000000
misc       : 34000000    1000000
recovery : 35000000    2000000
sysrecovery : 37000000    30000000
private    : 67000000    1000000
Reserve0 : 68000000    1000000
klog       : 69000000    1000000
Reserve1 : 6a000000    2000000
Reserve2 : 6c000000    1000000
cache    : 6d000000    28000000
UDISK    : 95000000    0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_nand boot_normal
name in map YST
no item name mac in the map
sunxi storage read fail
name in map YST
no item name wifi_mac in the map
sunxi storage read fail
name in map YST
no item name bt_mac in the map
sunxi storage read fail
name in map YST
no item name specialstr in the map
sunxi storage read fail
name in map YST
no item name serialno in the map
sunxi storage read fail
check user data form private
updataed mac = 0C:XX:55:BF:XX:XX
updataed wifi_mac = 0C:XX:55:5F:XX:XX
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
f_read btr over hd12896
read byte = 2764854
[    3.332]screen_id =0, screen_width =0, screen_height =0
[    3.337]frame buffer address 46400036
[    3.341]Hit any key to stop autoboot:  0
read boot or recovery all
[    3.901]sunxi flash read :offset 3000000, 13749052 bytes OK
[    3.910]ready to boot
board_display_setenv:  disp_para=0 init_disp=20b0404 tv_vdid=4d790100
[    3.918][mmc]: MMC Device 2 not found
[    3.922][mmc]:  mmc  not find,so not exit
NAND_UbootExit
NB1 : NAND_LogicExit
nand release dma:0
[    3.926]
Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:
      Start:  0x40000000
      Size: 1024MB
ion_carveout reserve: 160m@0 300m@0 130m@1 200m@1
ion_reserve_select: ion chipid  [0x2c00081!
ion_reserve_common: ion reserve: [0x4d400000, 0x60000000]!
[ 0.779959] ls_fetch_sysconfig_para: type err  device_used = -1063817068.
[ 0.787942] [RTC] WARNING: Rtc time will be wrong!!
[ 0.793431] [RTC] WARNING: use *internal OSC* as clock source
[ 0.800432] tscdev_init: tsc driver is disabled
[ 0.807261] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 0.828111] sunxi_oops: heming add OOPS_INFO_ADDR = -20
[ 1.490651] ths_fetch_sysconfig_para: type err  device_used = 1.
[ 1.508573] init: /init.sun8i.rc: 728: ignored duplicate definition of service 'property'
[ 1.563181] init: open path: /dev/bus/usb/001/001
[ 1.741116] init: open path: /dev/bus/usb/002/001
[ 1.893042] init: open path: /dev/bus/usb/003/001
[ 2.121006] init: open path: /dev/bus/usb/004/001
[ 2.274964] init: /dev/hw_random not found
[ 2.279841] init: defined DONT_SHOW_INITLOGO
[ 2.285240] init: init_disp=0x20b0404, type=2, id=1
[ 2.290722] init: disp=1,type=2,mode=11
[ 10.172115] init: start e2fsck listening...
[ 10.894558] init: dont need format /dev/block/by-name/private
[ 11.061602] Failed to get mali parameter!
[ 11.176743] init: C_IN_START
[ 11.179774] init: path = /dev/block/by-name/cache
[ 11.185108] init: C_IN_START
[ 11.188313] init: path = /dev/block/by-name/UDISK
[ 11.193617] init: C_IN_START
[ 11.196831] init: path = /dev/block/by-name/Reserve1gpio_pin_1(362) gpio_request
[ 11.334589] init: /dev/hw_random not found
[ 11.346434] init: untracked pid 79 exited
[ 11.346995] init:  ERR: boost sysctrl open fail,No such file or directory!
[ 11.347028] init:  ERR: boost sysctrl open fail,No such file or directory!
[ 11.347053] init:  ERR: boost sysctrl open fail,No such file or directory!
[ 11.388753] healthd: Could not open /sys/class/power_supply
[ 11.395108] healthd: No charger supplies found
[ 11.491971] android_usb: already disabled
[ 11.496667] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 11.507377] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
root@ysten-e4-gw:/ # [ 11.969751] gmac0 gmac0: eth0: *** set the ethernet carrier off
[ 22.888418] init: sys_prop: permission denied uid:1000  name:ro.serialno
[ 22.896144] init: sys_prop: permission denied uid:1000  name:ro.product.stb.stbid
[ 39.494352] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit

baibye · 發表于 2017-12-25 09:53

看來還是要想辦法把散熱片搞下來，猜是A31S的

290533234 · 發表于 2018-2-11 19:35

大神這個盒子破解了嗎？求教教??！

baibye · 發表于 2018-3-10 18:53

290533234 發表于 2018-2-11 19:35
大神這個盒子破解了嗎？求教教啊！

是全志H3的芯片，1+8G的配置，但無線是ESP8089的，目前的包基本驅動不起來，有線可以

› 你問我答 / 玩機教程 / 固件 › 你問我答