TTL有輸出，不能輸入求解。。。

zhujunsq · 發表于 2016-12-13 18:53

試過創維的E900和6108V9，都是這個問題，有輸出不能輸入。。。但是線是肯定好的，刷路由器沒問題，請教高手?。?！謝謝

宇宙統帥 · 發表于 2016-12-13 20:56

@hao501802766

hao501802766 · 發表于 2016-12-14 09:21

截圖看看跑的什么命令。。。

11651189 · 發表于 2016-12-14 22:11

換個終端模擬軟件試試，我遇到過，換了幾個軟件且不同版本，最后在XP系統下用Xshell家庭版正常，刷路由，刷盒子都行。還有，有數據輸出，等數據輸出跑完后按下回車鍵試試。

migda · 發表于 2016-12-29 09:14

直接輸入命令回車，有的終端是不顯示輸入命令

liu98986623 · 發表于 2017-11-28 18:00

hao501802766 發表于 2016-12-14 09:21
截圖看看跑的什么命令。。。

Bootrom start
Boot from eMMC
Initializing DDR ... OK
Starting DDR training ... OK
Starting fastboot ...

System startup

Reg Version:  v1.1.0
Reg Time:    2016/8/19  17:40:53
Reg Name:    hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Relocate Boot to DDR

Jump to DDR

Compressed-boot v1.0.0
Uncompress.......................Ok

System startup

Reg Version:  v1.1.0
Reg Time:    2016/8/19  17:40:53
Reg Name:    hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Relocate Boot to DDR

Jump to DDR

Fastboot 3.3.0-00985-gee6e5ef-dirty (liuying@HW-TV-S7) (Dec 12 2016 - 15:52:05)

Fastboot:    Version 3.3.0
Build Date: Dec 12 2016, 15:55:41
CPU:          Hi3798Mv100 (CA)
Boot Media: eMMC
DDR Size:    1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!

MMC/SD controller initialization.
No MMC/SD card detect when read `SDIO_CARD_DETECT` pin.

Boot Env on eMMC
Env Offset:       0x00100000
Env Size:          0x00010000
Env Range:          0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked

SDK Version: HiSTBAndroidV600R001C00SPC064_v2016060803

HI_Flash_Read Ret= 2048
HI_Flash_Read Ret= 2048
HMT_read_bootlogo_count, bootlogo_count=1
HMT_write_bootlogo_count, bootlogo_count=2
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800
Security Begin Read RSA Key!
Secure boot is enabled
get key value  0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 10485760
HI_Flash_Read Ret= 10485760
******** boot from kernel...********
[HMT]Verify kernel begin.
HI_Flash_Read Ret= 1024
HI_Flash_Read Ret= 1024
The kernel size is [8167424]
7b62cf1f8ec67a351d95311f4b4abce61e71f483507eccb6a75503bf3f53a4e6
[HMT]Kernel verify OK.
bootargs = coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastbo    ot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo)    ,16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),500M(backup),500M    (cache),650M(system),15M(extdata),-(userdata)  quiet  HI_Flash_Read Ret= 512
HI_Flash_Read Ret= 512
Stb mac is : [68:CC:6E:40:F6:16]

hpm_code_average = 0x102

Reserve Memory
Start Addr:       0x3FFFE000
Bound Addr:       0x8E65000
Free  Addr:       0x3EB9D000
Alloc Block:  Addr       Size
               0x3FBFD000    4194304
               0x3F8FC000    3145728
               0x3F87B000    524288
               0x3F878000    8192
               0x3F843000    212992
               0x3F742000    1048576
               0x3F73E000    12288
               0x3F3B9000    3686400
               0x3F223000    1658880
               0x3EE9E000    3686400
               0x3EBA0000    3133440
               0x3EB9D000    8192

Press Ctrl+C to stop autoboot
initrd rd_start = 4e00000,rd_end = 4e4fc60
load:2000000,blob_start:1ffc7c0,blob_end:2775d28,image_start:1ffc800,image_len:7    79528
Loading Kernel Image ... OK
OK
kernel loaded at 0x02000000, end = 0x02779528
initrd rd_start = 4e00000,rd_end = 4e4fc60
HMT_write_bootlogo_count, bootlogo_count=0
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
libphy: PHY himii:1f not found
init: /init.rc: 719: invalid option 'disable'
init: /init.rc: 728: invalid option 'disable'
init: /init.rc: 737: invalid option 'disable'
init: /init.bigfish.rc: 94: invalid option 'sdcard_r'
init: could not import file '/init.thirdos.rc' from '/init.rc'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p17
init: init: result is 256
init: /dev/hw_random not found
init:
stb-1 8V9 typeinit: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s    ys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy    s/vm/extra_free_kbytes'
我的也是 6108V9 主板上面是6108v9b 盒子背面6108v9c

liu98986623 · 發表于 2017-11-28 18:00

hao501802766 發表于 2016-12-14 09:21
截圖看看跑的什么命令。。。

Bootrom start
Boot from eMMC
Initializing DDR ... OK
Starting DDR training ... OK
Starting fastboot ...

System startup

Reg Version:  v1.1.0
Reg Time:    2016/8/19  17:40:53
Reg Name:    hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Relocate Boot to DDR

Jump to DDR

Compressed-boot v1.0.0
Uncompress.......................Ok

System startup

Reg Version:  v1.1.0
Reg Time:    2016/8/19  17:40:53
Reg Name:    hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Relocate Boot to DDR

Jump to DDR

Fastboot 3.3.0-00985-gee6e5ef-dirty (liuying@HW-TV-S7) (Dec 12 2016 - 15:52:05)

Fastboot:    Version 3.3.0
Build Date: Dec 12 2016, 15:55:41
CPU:          Hi3798Mv100 (CA)
Boot Media: eMMC
DDR Size:    1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!

MMC/SD controller initialization.
No MMC/SD card detect when read `SDIO_CARD_DETECT` pin.

Boot Env on eMMC
Env Offset:       0x00100000
Env Size:          0x00010000
Env Range:          0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked

SDK Version: HiSTBAndroidV600R001C00SPC064_v2016060803

HI_Flash_Read Ret= 2048
HI_Flash_Read Ret= 2048
HMT_read_bootlogo_count, bootlogo_count=1
HMT_write_bootlogo_count, bootlogo_count=2
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800
Security Begin Read RSA Key!
Secure boot is enabled
get key value  0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 10485760
HI_Flash_Read Ret= 10485760
******** boot from kernel...********
[HMT]Verify kernel begin.
HI_Flash_Read Ret= 1024
HI_Flash_Read Ret= 1024
The kernel size is [8167424]
7b62cf1f8ec67a351d95311f4b4abce61e71f483507eccb6a75503bf3f53a4e6
[HMT]Kernel verify OK.
bootargs = coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastbo    ot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo)    ,16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),500M(backup),500M    (cache),650M(system),15M(extdata),-(userdata)  quiet  HI_Flash_Read Ret= 512
HI_Flash_Read Ret= 512
Stb mac is : [68:CC:6E:40:F6:16]

hpm_code_average = 0x102

Reserve Memory
Start Addr:       0x3FFFE000
Bound Addr:       0x8E65000
Free  Addr:       0x3EB9D000
Alloc Block:  Addr       Size
               0x3FBFD000    4194304
               0x3F8FC000    3145728
               0x3F87B000    524288
               0x3F878000    8192
               0x3F843000    212992
               0x3F742000    1048576
               0x3F73E000    12288
               0x3F3B9000    3686400
               0x3F223000    1658880
               0x3EE9E000    3686400
               0x3EBA0000    3133440
               0x3EB9D000    8192

Press Ctrl+C to stop autoboot
initrd rd_start = 4e00000,rd_end = 4e4fc60
load:2000000,blob_start:1ffc7c0,blob_end:2775d28,image_start:1ffc800,image_len:7    79528
Loading Kernel Image ... OK
OK
kernel loaded at 0x02000000, end = 0x02779528
initrd rd_start = 4e00000,rd_end = 4e4fc60
HMT_write_bootlogo_count, bootlogo_count=0
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
libphy: PHY himii:1f not found
init: /init.rc: 719: invalid option 'disable'
init: /init.rc: 728: invalid option 'disable'
init: /init.rc: 737: invalid option 'disable'
init: /init.bigfish.rc: 94: invalid option 'sdcard_r'
init: could not import file '/init.thirdos.rc' from '/init.rc'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p17
init: init: result is 256
init: /dev/hw_random not found
init:
stb-1 8V9 typeinit: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s    ys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy    s/vm/extra_free_kbytes'
我的也是 6108V9 主板上面是6108v9b 盒子背面6108v9c

liu98986623 · 發表于 2017-11-28 18:01

hao501802766 發表于 2016-12-14 09:21
截圖看看跑的什么命令。。。

Bootrom start
Boot from eMMC
Initializing DDR ... OK
Starting DDR training ... OK
Starting fastboot ...

System startup

Reg Version:  v1.1.0
Reg Time:    2016/8/19  17:40:53
Reg Name:    hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Relocate Boot to DDR

Jump to DDR

Compressed-boot v1.0.0
Uncompress.......................Ok

System startup

Reg Version:  v1.1.0
Reg Time:    2016/8/19  17:40:53
Reg Name:    hi3798mdmo1g_hi3798mv100_ddr3_1gbyte_16bitx2_4layers_emmc.reg

Relocate Boot to DDR

Jump to DDR

Fastboot 3.3.0-00985-gee6e5ef-dirty (liuying@HW-TV-S7) (Dec 12 2016 - 15:52:05)

Fastboot:    Version 3.3.0
Build Date: Dec 12 2016, 15:55:41
CPU:          Hi3798Mv100 (CA)
Boot Media: eMMC
DDR Size:    1GB

Check nand flash controller v610. found
Special NAND id table Version 1.36
Nand ID: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
No NAND device found!!!

MMC/SD controller initialization.
No MMC/SD card detect when read `SDIO_CARD_DETECT` pin.

Boot Env on eMMC
Env Offset:       0x00100000
Env Size:          0x00010000
Env Range:          0x00010000
HI_OTP_LockIdWord,327: ID_WORD have already been locked

SDK Version: HiSTBAndroidV600R001C00SPC064_v2016060803

HI_Flash_Read Ret= 2048
HI_Flash_Read Ret= 2048
HMT_read_bootlogo_count, bootlogo_count=1
HMT_write_bootlogo_count, bootlogo_count=2
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800
Security Begin Read RSA Key!
Secure boot is enabled
get key value  0x0
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 3072
HI_Flash_Read Ret= 10485760
HI_Flash_Read Ret= 10485760
******** boot from kernel...********
[HMT]Verify kernel begin.
HI_Flash_Read Ret= 1024
HI_Flash_Read Ret= 1024
The kernel size is [8167424]
7b62cf1f8ec67a351d95311f4b4abce61e71f483507eccb6a75503bf3f53a4e6
[HMT]Kernel verify OK.
bootargs = coherent_pool=2M console=ttyAMA0,115200 blkdevparts=mmcblk0:1M(fastbo    ot),4M(bootargs),16M(recovery),1M(deviceinfo),4M(baseparam),4M(pqparam),4M(logo)    ,16M(fastplay),8M(misc),24M(factory),12M(kernel),8M(iptv_data),500M(backup),500M    (cache),650M(system),15M(extdata),-(userdata)  quiet  HI_Flash_Read Ret= 512
HI_Flash_Read Ret= 512
Stb mac is : [68:CC:6E:40:F6:16]

hpm_code_average = 0x102

Reserve Memory
Start Addr:       0x3FFFE000
Bound Addr:       0x8E65000
Free  Addr:       0x3EB9D000
Alloc Block:  Addr       Size
               0x3FBFD000    4194304
               0x3F8FC000    3145728
               0x3F87B000    524288
               0x3F878000    8192
               0x3F843000    212992
               0x3F742000    1048576
               0x3F73E000    12288
               0x3F3B9000    3686400
               0x3F223000    1658880
               0x3EE9E000    3686400
               0x3EBA0000    3133440
               0x3EB9D000    8192

Press Ctrl+C to stop autoboot
initrd rd_start = 4e00000,rd_end = 4e4fc60
load:2000000,blob_start:1ffc7c0,blob_end:2775d28,image_start:1ffc800,image_len:7    79528
Loading Kernel Image ... OK
OK
kernel loaded at 0x02000000, end = 0x02779528
initrd rd_start = 4e00000,rd_end = 4e4fc60
HMT_write_bootlogo_count, bootlogo_count=0
base:0x3200000, offset:0x600000, bytes:0x800
fastboot_flash_write
BaseAddress:0x3200000, DataSize:0x700000, offset:0x600000, bytes:0x800
Flash write result:0x800

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
libphy: PHY himii:1f not found
init: /init.rc: 719: invalid option 'disable'
init: /init.rc: 728: invalid option 'disable'
init: /init.rc: 737: invalid option 'disable'
init: /init.bigfish.rc: 94: invalid option 'sdcard_r'
init: could not import file '/init.thirdos.rc' from '/init.rc'
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
init: init: /system/bin/e2fsck
init: init: -v
init: init: -f
init: init: -y
init: init: /dev/block/mmcblk0p17
init: init: result is 256
init: /dev/hw_random not found
init:
stb-1 8V9 typeinit: cannot find '/system/bin/rild', disabling 'ril-daemon'
healthd: No charger supplies found
init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/mtkbt', disabling 'blueangel'
init: cannot find '/system/bin/dtvserver', disabling 'dtvserver'
init: cannot find '/system/bin/usb-driver', disabling 'usb-driver'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${s    ys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sy    s/vm/extra_free_kbytes'
我的也是 6108V9 主板上面是6108v9b 盒子背面6108v9c

磊石頭 · 發表于 2017-12-9 17:27

樓主解決了嗎???我發現和你一樣無論是V9還是V9c串口都是有輸出，鍵盤無法輸入。同樣的環境街上中興的B860串口輸出輸入正常?。?！不解，現在手上十幾個V9的盒子卡在第一屏，需要重新刷機，但是遙控不起作用，短接J15或j16（V9C)刷機走到一把盒子就重啟，換了很多個固件都不行。想雙清一下（遙控不起作用）串口又不能接受輸入，怎么搞？

› 你問我答 / 玩機教程 / 固件 › ZNDS刷機/救磚

TTL有輸出，不能輸入求解。。。

TTL有輸出，不能輸入求解。。。

TTL有輸出，不能輸入求解。。。

TTL有輸出，不能輸入求解。。。