首頁 收藏 QQ群
 網站導航

ZNDS智能電視網 推薦當貝市場

TV應用下載 / 資源分享區

軟件下載 | 游戲 | 討論 | 電視計算器

綜合交流 / 評測 / 活動區

交流區 | 測硬件 | 網站活動 | Z幣中心

新手入門 / 進階 / 社區互助

新手 | 你問我答 | 免費刷機救磚 | ROM固件

查看: 84629|回復: 13
上一主題 下一主題
[移動魔百和]

[red]福建移動魔百合MG101[/red]

[復制鏈接]
跳轉到指定樓層
樓主
發表于 2017-1-10 08:19 | 只看該作者 回帖獎勵 |倒序?yàn)g覽 |閱讀模式 | 來自福建
用TTL代碼一起跑不停 如何解決  在.... in 110ms這個位置停一會兒，又開始循環，按。dddd按粘貼命令進去也是沒反應
粘貼命令進去也是沒反應  試過了

可QQ一起溝通下。508835308  看還有誰是這盒子的，或者已經破了。

RTL871X: <=== rtw_ips_pwr_down..................... in 110ms
RTL871X: cfg80211_rtw_scan(wlan0)
RTL871X: _rtw_pwr_wakeup call ips_leave....
RTL871X: ==>ips_leave cnts:4
RTL871X: ===>  rtw_ips_pwr_up..............
RTL871X: ===> ips_netdrv_open.........
RTL871X:  power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea.
RTL871X:  MAC has not been powered on yet.
RTL871X: SetHwReg8723B: bMacPwrCtrlOn=1
RTL871X: rtl8723b_FirmwareDownload(wlan0) tmp_ps=0
RTL871X: rtl8723b_FirmwareDownload fw: FW_NIC, size: 31952
RTL871X: rtl8723b_FirmwareDownload: fw_ver=27 fw_subver=0000 sig=0x5301, Month=10, Date=30, Hour=15, Minute=16
RTL871X: rtl8723b_FirmwareDownload(): Shift for fw header!
RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00070605
RTL871X: _8051Reset8723: Finish
RTL871X: _FWFreeToGo: Polling FW ready OK! (420, 40ms), REG_MCUFWDL:0x000706c6
RTL871X: FWDL success. write_fw:1, 60ms
RTL871X:  <=== rtl8723b_FirmwareDownload()
RTL871X: fw download ok!
RTL871X: usb_AggSettingRxUpdate: RX Agg-USB mode, size=4KB, timeout=1024us
RTL871X: ===>phy_SwChnl8723B: Channel = 1
RTL871X: pDM_Odm TxPowerTrackControl = 1
RTL871X: pDM_Odm TxPowerTrackControl = 1
RTL871X: PHY_IQCalibrate_8723B =>path:B Restore TX IQK result failed
RTL871X: PHY_IQCalibrate_8723B =>path:B  Restore RX IQK result failed
RTL871X: rtl8723bu_hal_init in 1050ms
RTL871X: ===>phy_SwChnl8723B: Channel = 1
RTL871X: #### hw_var_set_opmode() -5215 iface_type(0) mode = 2 ####
RTL871X: Using the default RF gain.
RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=0 len=7
RTL871X: <===  rtw_ips_pwr_up.............. in 1080ms
RTL871X: nolinked power save leave
RTL871X: ==> ips_leave.....LED(0x00e28282)...
RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=1 len=7
RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=2 len=7
RTL871X: ===>phy_SwChnl8723B: Channel = 1
RTL871X: ===>phy_SwChnl8723B: Channel = 2
RTL871X: ===>phy_SwChnl8723B: Channel = 3
RTL871X: ===>phy_SwChnl8723B: Channel = 4
RTL871X: ===>phy_SwChnl8723B: Channel = 5
RTL871X: ===>phy_SwChnl8723B: Channel = 6
RTL871X: ===>phy_SwChnl8723B: Channel = 7
RTL871X: ===>phy_SwChnl8723B: Channel = 8
RTL871X: ===>phy_SwChnl8723B: Channel = 9
RTL871X: ===>phy_SwChnl8723B: Channel = 10
RTL871X: ===>phy_SwChnl8723B: Channel = 11
RTL871X: ===>phy_SwChnl8723B: Channel = 12
RTL871X: ===>phy_SwChnl8723B: Channel = 13
RTL871X: ===>phy_SwChnl8723B: Channel = 1
RTL871X: rtl8723b_c2h_packet_handler: C2H, ID=9 seq=3 len=7
RTL871X: survey done event(1d) band:0 for wlan0
RTL871X: rtw_indicate_scan_done(wlan0)
RTL871X: ==>rtw_ps_processor .fw_state(8)
RTL871X: ==>ips_enter cnts:5
RTL871X: nolinked power save enter
RTL871X: ===> rtw_ips_pwr_down...................
RTL871X: ====> rtw_ips_dev_unload...
RTL871X: usb_read_port_cancel
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(False) OR bSurpriseRemoved(False)
RTL871X: usb_write_port_cancel
RTL871X: ==> rtl8723bu_hal_deinit
RTL871X: CardDisableRTL8723U(wlan0): bMacPwrCtrlOn=1
RTL871X: SetHwReg8723B: bMacPwrCtrlOn=0
RTL871X: <=== rtw_ips_pwr_down..................... in 110ms




上一篇：求助 我的魔百和為啥沒有看電視頻道的選項
下一篇：移動魔百和cm101s-2輕松安裝第三方軟件（免拆機、免刷...
沙發
發表于 2017-1-10 11:27 | 只看該作者 | 來自浙江
幫你頂頂   這個我也看不懂！
板凳
 樓主| 發表于 2017-1-10 15:09 | 只看該作者 | 來自福建
謝謝。。。沉底了。。。。
地板
發表于 2017-2-10 13:05 | 只看該作者 | 來自江西
雖不明，但覺厲！
5#
 樓主| 發表于 2017-2-14 15:06 | 只看該作者 | 來自福建
已破解了。。。。
6#
發表于 2017-3-1 13:16 | 只看該作者 | 來自福建
如何破解的呀？我的盒子是廈門移動咪咕mg101，急求破解方法，不方便回復的話也可私信我，謝謝！
7#
發表于 2017-3-6 18:38 | 只看該作者 | 來自湖北
幫忙頂了 我的也是
8#
發表于 2017-3-15 17:08 | 只看該作者 | 來自福建
fjjjq 發表于 2017-2-14 15:06
已破解了。。。。

怎么破解的
9#
 樓主| 發表于 2017-3-16 15:42 | 只看該作者 | 來自福建
拆機TTL破解
10#
發表于 2017-4-27 19:25 | 只看該作者 | 來自福建
想問一下九樓的，你是怎么破解的，有沒有相關文章參考一下。

本版積分規則

Archiver|新帖|標簽|軟件|Sitemap|ZNDS智能電視網 ( 蘇ICP備2023012627號 )

網絡信息服務信用承諾書 | 增值電信業務經營許可證：蘇B2-20221768 丨 蘇公網安備 32011402011373號

GMT+8, 2024-12-23 08:38 , Processed in 0.071809 second(s), 12 queries , Redis On.

Powered by Discuz!

監督舉報：report#znds.com (請將#替換為@)

© 2007-2024 ZNDS.Com

快速回復 返回頂部 返回列表